• en
Product catalogue Archive products FAQ Comparison
\ \

easyTRACK

comparison of products printable version
  • Product ID
    5999881193121

Main features:

  • GPRS data transfer
  • GPS receiver
  • WEB display
  • Connectible to car alarms
  • Programmable through USB and IP

Technical data:

  • Transmission frequency:
    GSM 900/1800/1900 MHz
  • Supply voltage:
    10-28 VDC
  • Current consumption:
    Nominal: 120mA
    Maximum: 500mA
    Standby: ≈[email protected]
  • Operating temperature:
    -20°C - +70°C
  • Dimensions:
    84 x 72 x 32mm
  • GPS receiver dimensions:
    65 x 42 x 18mm
  • Weight: 200g

Characteristics of the system:

  • Visualization and log of the position and route 
  • Separation of business/private routes
  • Evaluation of the speed, parking, duration of passage, etc.
  • Sends SMS containing the current vehicle position and its traffic data
  • At the effect of events:

- Forwards car alarm signals to monitoring station
- Performs voice call to the user’s phone
- Sends SMS to the user’s phone

  • Independent alarm functions, e.g.: supervises changes of the position when engine is not running, alarm initiated by input contact

    Operational options

    • Web server service - www.easytrack.hu
      or
    • Individual server for monitoring station
    • Web display on Google Maps™ surface
    • Private POI management, speed and fuel diagram, route report, vehicle uptime report, refueling report 
    • Low operational cost

    Technical specification

    • GPS receiver dimensions
      65x42x18 mm
    • Frequency band
      900/1800/1900 MHz
    • Operating temperature
      -20 C - +70 C
    • Supply voltage
      10-28 VDC
    • Current consumption (standby)
      ≈[email protected]
    • Current consumption (maximum)
      500mA
    • Current consumption (nominal)
      120mA
    • Dimensions
      84x72x32 mm
    • Weight
      200 g

    Features

    • Individual alarm functions
      Yes
    • Sending position and traffic data in SMS message
      Yes
    • Position and route vizualization and recording
      Yes
    • Evaluation of speed, parking, duration of journey, etc..
      Yes

    Effect of events

    • Forwarding of vehicle's alarm system signals to monitoring station
      Yes
    • Visualisation of the posisiton where the alarm occured on the web interface
      Yes
    • Initiates voice call to the user's phone
      Yes
    • Sends SMS to the user's phone
      Yes

    1. The LED is red on the device.

      The device cannot connect to the net. Please check the GSM signal, SIM card, and the antenna connection.

    2. If I am not using the vehicle, will the device not merge the battery?

      In the module, you can parameterize that how long should it take from turning off the ignition to battery saving mode. In this mode, the power consumption is a lot less.

    3. Is the easyTRACK device harmful to your health?

      It has the same effect on health, than any other mobile phone.

    4. Despite the fact that I received the call, the device makes a recall. Why?

      Perhaps the machine is set that the call must be acknowledged. In this case, it will redial during the alarm time, until you acknowledge the alarm. You can do this by pushing the asterisk * button.

    5. The device is not connecting to the GPRS net. Why?

      Check the APN settings, the power supply and power requirements of the module, as well as the GSM antenna connection and signal strength.

    6. It is not possible to read or upload the setting to the device with the programming software. The connection does not get through, or sometimes the downloading stops.

      Please power up the module first, after that connect it to the computer.

    7. After installing the programmer software there is an error message saying that the DLL file is missing and it can not start.

      Some operating systems create a missing DLL file after connecting to the module. Connect the module through a USB to the computer, and after this start the programming software again.

    8. The module sends a long line of continuous letter / sequence SMS message to the SMS forwarding featured phone number. What is the reason for this?

      This phenomenon happens when you do not receive a regular SMS (text) to the phone module, but some kind of a multimedia message (MMS photo) or some other encoded message (for example, encoded Cyrillic letters with accents or other capitalization). An industrial phone module is not able to handle this, that's why the mentioned letters/sequences are converted into Unicode form and are forwarded to your phone (depending on the size of the message 1 MMS can be received in 3 or 4 SMSs). Please note that in this case there is no problem with the device itself, but this phenomenon is caused by the above-described reason. If this occurs regularly, there is a good chance that it is an advertising / marketing message sent by the service provider, which can only be stopped by either asking the service-provider not to send such messages to this given phone number or by turning off the message forwarding function (in the settings: delete the SMS forwarding phone number), if this function is not absolutely necessary.

    Message to the customer service

    ?

    Downloads

    Version:
    • easyTRACK_v1-62_EN_Manual_16-11-2011.pdf
      2012.02.14 4.02 MB Download
    • easyTRACK_v1-62_EN_Guide_11-07-2011.pdf
      2011.07.11 1.03 MB Download
    • easyTRACK_Remoter_v1-35_Setup.exe
      2011.12.02 8.53 MB Download
    • easyTRACK_CE.pdf
      2011.12.02 585.71 KB Download
    • easyTRACK_EN_Leaflet.pdf
      2011.12.02 2.02 MB Download
    no uploaded file