-
Product ID5999881193237
-
Package size230x160x35 mm
-
Package weight0.27 kg
Main features:
- GPRS communication
- Management of 2 independent SIM cards
- Forwards incoming SMS messages to 2 phone numbers
- Stores the last 1000 events in the event list
- 4 configurable NO/NC contact inputs onboard and optional 24-input expansion module
- Reports the state of 4+24 inputs to monitoring station
- Configurable Contact ID codes for each input and custom event
- 2 configurable NO/NC relay outputs (monostable, bistable, state switching), controllable by events and/or by user
- Backup battery management
- GPRS channel supervision
- Supply voltage supervision
- Status LEDs
Technical specification
-
Transmission channelGSM / GPRS
-
Frequency band900/1800, 850/1900 MHz
-
Operating temperature-20 C - +70 C
-
Supply voltage9-30 VDC
-
Current consumption (maximum)500mA @ 12VDC
-
Current consumption (nominal)120mA @ 12VDC
-
CasingNo (PCB)
-
Terminal connector designMounted to panel
-
Dimensions150x110x19 mm
Inputs
-
Contact inputs4 / 28 (with expansion module)
-
Configurable inputs (NO/NC)Yes
Outputs
-
Relay outputs2
-
Output control by SMSYes
-
Output activation on GSM faultYes
Supported protocols
-
TEX protocolYes
Programming
-
Programming methodUSB / IP / GSM data call (CSD)
-
Programming softwareYes
Users
-
User phone numbers for forwarding incoming SMS messages2
Remote monitoring
-
Monitoring station IP addresses6
-
Individual reporting to monitoring stationYes
Other functions
-
Battery connection feature, intelligent chargingYes
-
Configurable internal Contact ID event codesYes
-
Built-in internal clockYes
-
Security passwordYes
-
Event logs / Number of stored eventsYes / 100
-
Dual SIM managementYes
-
Periodic test reportYes
-
The device is not connecting to the GPRS net. Why?
Check the APN settings, the power supply and power requirements of the module, as well as the GSM antenna connection and signal strength.
-
After installing the programmer software there is an error message saying that the DLL file is missing and it can not start.
Some operating systems create a missing DLL file after connecting to the module. Connect the module through a USB to the computer, and after this start the programming software again.
-
The module sends a long line of continuous letter / sequence SMS message to the SMS forwarding featured phone number. What is the reason for this?
This phenomenon happens when you do not receive a regular SMS (text) to the phone module, but some kind of a multimedia message (MMS photo) or some other encoded message (for example, encoded Cyrillic letters with accents or other capitalization). An industrial phone module is not able to handle this, that's why the mentioned letters/sequences are converted into Unicode form and are forwarded to your phone (depending on the size of the message 1 MMS can be received in 3 or 4 SMSs). Please note that in this case there is no problem with the device itself, but this phenomenon is caused by the above-described reason. If this occurs regularly, there is a good chance that it is an advertising / marketing message sent by the service provider, which can only be stopped by either asking the service-provider not to send such messages to this given phone number or by turning off the message forwarding function (in the settings: delete the SMS forwarding phone number), if this function is not absolutely necessary.
Downloads
-
GPRS-GSM ProCom Programming software v1-24 (without DotNET)
-
GPRS-GSM ProCom Programming software v1-24 (DotNET included)
-
Release notes
-
GPRS ProCom F Firmware S900/S900R v1.00.0115
-
GPRS ProCom F firmware S900/S900R v1.00.0113
-
GPRS ProCom F firmware S900/S900R v1.00.0106
-
Release notes
-
BootloaderX22 firmware upgrade instructions (EN)
-
BootloaderX22 EN firmware upgrade utility