DUALCOM SIA IP EXT24

comparison of products printable version


Product Models:

    DUALCOM SIA IP with DUALCOM EXT24-D extension module

    Communicator for fire alarm control panels that converts contact input events to SIA DC-09, TELLMon or TEX format and sends them to the alarm monitoring receiver through IP channel on mobile GPRS network.

    Main features:

    • Contact controlled communicator
    • GPRS communication
    • Supported communication protocols: SIA DC-09, TELLMon, TEX
    • Parallel usage of two independent modems
    • Communicates directly with the receivers
    • Reporting up to 4 IP addresses, meaning 2 primary IP addresses per network
    • 6+24 NO/NC/EOL contact inputs
    • 6 configurable NO relay outputs
    • Supervision message with configurable interval of sending for automatic supervision of transmission channels
    • Supported operating system: Windows 10

    Characteristics:

    • It can be used for any control panel which has contact outputs or the contact outputs can be obtained with relays. Using this device, the input events are sent to the monitoring station’s IP receiver over the GPRS network, using SIA IP protocol based on ANSI/SIA DC-09-2007 standard, TELLMon or TEX protocol.
    • No need for a central server, only an IP receiver with Internet connection is necessary. The device works with TELLMonTEX-MVP and other receivers that support the SIA DC-09 protocol.
    • Possibility to separate e.g. alarm events and technical events (send alarm events only to the alarm monitoring station, and technical events only to the technical monitoring station).
    • Due to the application of duplicated phone modules, the DUALCOM SIA IP guarantees a high security level. Therefore, it is suitable for high risk signal transmission applications (e.g. transmission of fire alarm events).

    Application area:

    • IP communicator for fire alarm control panels


    Technical specification

    • Dual GSM (2 independent GSM modules)
      Yes
    • Transmission channel
      2G
    • Frequency band
      850/900/1800/1900 MHz
    • Operating temperature
      -20 ºC - +70 ºC
    • Supply voltage
      12-30V DC
    • Current consumption (maximum)
      400 mA @ 12 VDC, 200 mA @ 24 VDC
    • Current consumption (nominal)
      110 mA @ 12 VDC
    • Casing
      None (PCB)
    • Terminal connector design
      Mounted on the panel
    • Dimensions
      145x115x35 mm
    • Weight
      410 g

    Inputs

    • Contact inputs
      6+24
    • Configurable inputs (NO/NC)
      Yes
    • EOL inputs
      Yes
    • Adjustable input sensitivity
      Yes

    Outputs

    • Relay outputs
      6

    Notifications

    • IP-based reporting to monitoring station
      Yes

    Supported protocols

    • SIA IP DC-09 protocol
      Yes
    • TELLMon protocol
      Yes
    • TEX protocol
      Yes

    Programming

    • Programming method
      USB / IP
    • Programming software
      Yes

    Remote monitoring

    • Monitoring station IP addresses
      6
    • Individual reporting to monitoring station
      Yes

    Other functions

    • Configurable internal Contact ID event codes
      Yes
    • Built-in internal clock
      Yes
    • Dual SIM management
      Yes

    Message to the customer service

    ?

    Downloads

    Version:
    • DUALCOM v3 EN-HU-DE Quick Start Guide 24-04-2020
      2020.04.24 1.23 MB Download
    • DUALCOM v3.03 Manual EN 16-09-2020
      2020.09.16 3.15 MB Download
    • DUALCOM Programming software v3.3.1 (3145)
      2020.09.29 18.68 MB Download
    • Declaration of performance
      2019.01.04 611.22 KB Download
    • DUALCOM Leaflet EN
      2013.02.21 709.91 KB Download
    • DUALCOM Firmware v3.3.0 (7848, EXE - USB)
      2020.04.30 965.00 KB Download
    • DUALCOM Firmware v3.3.0 (7848, TF3 - USB/IP)
      2020.04.30 984.09 KB Download
    • DualCom_bluext24 (BootLoaderUpdate It is required when upgrading from v2 to v3!)
      2019.01.23 240.25 KB Download
    no uploaded file