Dualcom v3.3.0

The programming software contains the following new functions and modifications:

  • Possibility to enable modem AT logging in the programming software
  • Introduction of remote access via cloud connection
  • Possibility to set separate client IDs for the remote monitoring servers
  • Handling prefixes for remote monitoring server identification
  • Limiting of the maximal value of periodic test reports to 24h
  • Handling periodic test reports has been modified (Test report starts automatically; it adjusts to the adjustable time only in case the periodic test interval is set to 24h.)
  • Direct IP connection in case of Dualcom has been terminated because on the one hand, it is not used in practice, on the other hand, it is difficult to handle due to the two modems
  • Handling common IDs and individual IDs for remote monitoring servers, depending on the firmware versions – supporting v3 versions released earlier
  • Introduction of quantity limits on event tracking
  • Possibility to change default Restore event names, similarly to new events

The programming software contains the following bug fixes:

  • In the module register you can select the option set Cloud address, however, it cannot be edited
  • Correction of event alignment in the event log
  • In case of input and sabotage events, deleting the DEFAULT remote monitoring signal did not delete the signal transmission, but the relay action instead. Thus, signal transmission could be recorded twice.
  • Termination of remote access to the menu item System log, as this function has not been available via modem, either.
  • In the event log, there has been no comment to the sign “T” until now
  • Extended supervision message intervals in case of TELLMon protocols (Until now, it was possible to set a supervision message interval of 2 seconds)
  • It was not able to connect to the cloud until registering the device ID in the module register
  • In case of SIA protocol, the client ID with a prefix jumbled when switching to another protocol
  • The new programming software did not read back TEX group code and device ID when using the old firmware.
  • Extension of name length of the action Sabotage – New event
  • Setting default supervision message interval (1 min), in case the user deletes the supervision message interval
  • In case of TEX protocol, the program does not download the settings
  • After uploading the Config file, the first event was not displayed in the DualCom event log
  • Status info was not displayed correctly in Status monitoring when connecting via Cloud
  • Blocking signal transmission without event code, signal transmission to the remote monitoring station will not be possible without event code in the future
  • In Status monitoring, device data was not displayed after pushing the query button
  • Optimizing tracking query on TELLMon protocol
  • After selecting the protocol, the software does not display the IDs correctly
  • Correcting “all events” query in the event log
  • CID code is not displayed correctly at input 1 and the expansion module input 1
  • After event download failed, the partially downloaded data were not displayed

The firmware contains the following new functions and modifications:

  • Introduction of Cloud connection, possibility of remote access and programming
  • Possibility to set separate client IDs for each remote monitoring server

The firmware contains the following bug fixes:

  • Termination of incomplete Contact ID messages, it will not be possible to send any incorrect Contact ID messages in the future, entering the event code is obligatory
  • Handling accented letters in the field Inputs correctly, as well as increasing the length of the field to 80 characters
  • Handling accented letters in the field Input events correctly, as well as increasing the length of the field to 80 characters
  • Handling accented letters in the field Sabotage events correctly, as well as increasing the length of the field to 80 characters
  • Handling accented letters in the field Service events correctly, as well as increasing the length of the field to 80 characters
  • Sending test reports automatically, after modifying the settings
  • Limiting the maximal value of periodic test reports to 24h - The test report starts automatically, and it adjusts to the adjustable time, if the periodic test interval equals 24h.