Adapter2 v7 is out now!

Version 7 of the Adapter2 firmware has recently been released.

The programming software contains the following bugfixes:

  • Deletion and correct uploading of the Contact ID board that was posted during the manufacturing process with the language chosen at installation
  • Correction of displaying the Contact ID chart
  • Correction of password changes of admin users
  • Login attempts without device ID have been disabled
  • Implementation of checking QR codes for mobile phone registration before generating them, in order to prevent generating a QR code that does not contain any device ID
  • Correction in the functioning of the QR code window for mobile device registration
  • Saving not only the audio file itself but also the file name when uploading an audio file via the programming software.
  • The programming software did not load the settings if Windows was in a region other than Hungary
  • Saving and loading event codes belonging to the service events correctly
  • The programming software managed to save the WIFI settings only by the second attempt
  • Increased timeout of write operations for more stable functioning when connecting via USB
  • In case of an USB disconnection, the programming software stops the write operation after the timeout expires
  • Correction of checking  the admin rights, blocking factory reset when locked
  • The language that is used at installation overwrites the language that was used at the previous installation (before this correction, the programming software always ran with the language of the first installation, despite the fact that it had been reinstalled in another language)
  • You cannot choose the language of the programming software anymore, the software runs with the language that was chosen at installation.
  • You cannot set the IP address of the TELL Cloud server in the programming software anymore, as changing it has no use, furthermore, it disturbs users
  • You can add new modules in the module register even after connecting
  • The duplication error that arises by giving a name to the user ID and the partition ID received from the alarm system has been corrected. Introduction of checking identity of names at the operations add, copy and modify.
  • Loading of settings has been corrected , deleting the previously saved data before reloading
  • Deallocation of the ID of the module that has been deleted from the module register
  • After turning on system logging, it was not possible to stop the system log
  • Saving the event log did not work as the save button was always inactive

The programming software contains the following new functions, modifications:

  • Uploading and deleting an audio file via the programming software restore the name that belongs to the sound position
  • Termination of the possibility to receive calls
  • Filtering invalid options when choosing a network, thus supporting only the same network as the network of the GSM modem of the device (in case of a 2G modem, 3G and 4G, in case of a 3G modem, 4G are not displayed)
  • Possibility to change WiFi access point from the programming software
  • Retrieval of SIM card balance with the operation GSM call
  • Introduction of the admin right WiFi setting
  • The menu General settings has been altered and organized
  • Introduction of state change when controlling the output
  • Introduction of choosing the GSM provider among SIM card settings
  • Introduction of the module SMS command, similarly to our product Pager4
  • Possibility to import individual zone names, partitions and usernames from CSV file
  • Displaying negative acknowledgements in the programming software
  • Possibility to set a supply voltage threshold value, similarly to our product Pager4
  • Possibility to set backup SMS transmission for emergencies
  • Possibility to limit outgoing GSM calls, similarly to the limitation of outgoing SMS messages
  • Possibility to set service events when reaching the daily limit for SMS messages
  • Possibility to save system events into files
  • Possibility to forward SMS commands received from users
  • In the menu Settings you can turn on debug logging
  • Introduction of MVP Next support
  • Possibility to change the client ID sent in the Contact ID code by the alarm system

The firmware contains the following bugfixes:

  • It has been possible to register up to 7 input events until now, despite the fact that the device is capable of handling up to 8 input events (perceiving/restoring of 4 inputs)
  • In case of load, the device made a mistake by event notifications – either it repeated or left out a signal
  • Functioning of the package counter in SIA protocol has been fixed
  • WiFi SSIDs with spaces in them have been enabled
  • In case of a remote connection, the status information had not been updated in the programming software

The firmware contains the following new functions, modifications:

  • WiFi-hardware support
  • From now on, you cannot make an audio report from a GSM call, but you can upload an audio record of better quality instead
  • The option for GSM network operator search has been implemented
  • You can set among the event types, whether the zone in the Contact ID code should be defined and forwarded to the remote monitoring station as zone or client ID
  • Possibility to change the client code sent by the alarm system in the Contact ID code
  • Introduction of a daily limit for GSM calls, as well as displaying the warning service events belonging to it
  • Sending a service event about reaching the daily SMS threshold
  • Introduction of signal transmission in SMS as remote monitoring backup for emergencies