easyAID Monitoring

comparison of products printable version

$ 360.00 + VAT (Br: $ 457.20 )
VAT value may change in regard to tax number of customer.

  • Product ID
  • Package size
    260x197x50 mm
  • Package weight
    1.10 kg

Emergency call device
(Monitoring station version)

  • Alarm reporting to monitoring station by pressing a button
  • Answers incoming calls automatically and puts them on speaker
  • Plays pre-recorded messages as daily reminders
  • Alarm reporting to monitoring station when temperature thresholds are exceeded
  • Reports nursing visit to monitoring station
  • Neck-worn pendant emergency button (the device supports up to 2 RF transmitters (the package includes 1 button)
  • Digital display with clock
  • Supported operating system: Windows 10


  • General emergency signaling device
  • Reports an accident, attack or sickness, by simply pressing a button
  • The neck-worn pendant Emergency Button assures the patient’s freedom of movement within the range of the device
  • With the help of pre-recordable daily reminders the patient’s drog treatment can be promoted
  • The alarm monitoring station can immediately obtain information on the patient’s status through a voice call
  • The device is easy to use, designed expressly for the elderly to use in case of emergency

Technical specification

  • Transmission channel
    2G / GSM
  • Frequency band
    850/900/1800/1900 MHz @GSM/GPRS
  • Operating temperature
    0 ºC - +70 ºC
  • Supply voltage
    12-30V DC
  • Current consumption (maximum)
    500 mA @ 12 VDC
  • Current consumption (nominal)
    180 mA @ 12 VDC
  • Casing
  • Dimensions
    176x100x30 mm
  • Weight
    300 g


  • IP-based reporting to monitoring station

Supported protocols

  • TEX protocol


  • Programming method
    USB / IP / GSM data call (CSD)
  • Programming software


  • User phone numbers for forwarding incoming SMS messages

Remote monitoring

  • Monitoring station IP addresses
  • Monitoring station phone numbers
  • Individual reporting to monitoring station

Other functions

  • Configurable internal Contact ID event codes
  • Built-in internal clock
  • Security password
  • Event logs / Number of stored events
    Yes / 1000
  • Caller identification
  • Periodic test report
  1. The device is not connecting to the GPRS net. Why?

    Check the APN settings, the power supply and power requirements of the module, as well as the GSM antenna connection and signal strength.

  2. It is not possible to read or upload the setting to the device with the programming software. The connection does not get through, or sometimes the downloading stops.

    Please power up the module first, after that connect it to the computer.

  3. After installing the programmer software there is an error message saying that the DLL file is missing and it can not start.

    Some operating systems create a missing DLL file after connecting to the module. Connect the module through a USB to the computer, and after this start the programming software again.

  4. The module sends a long line of continuous letter / sequence SMS message to the SMS forwarding featured phone number. What is the reason for this?

    This phenomenon happens when you do not receive a regular SMS (text) to the phone module, but some kind of a multimedia message (MMS photo) or some other encoded message (for example, encoded Cyrillic letters with accents or other capitalization). An industrial phone module is not able to handle this, that's why the mentioned letters/sequences are converted into Unicode form and are forwarded to your phone (depending on the size of the message 1 MMS can be received in 3 or 4 SMSs). Please note that in this case there is no problem with the device itself, but this phenomenon is caused by the above-described reason. If this occurs regularly, there is a good chance that it is an advertising / marketing message sent by the service provider, which can only be stopped by either asking the service-provider not to send such messages to this given phone number or by turning off the message forwarding function (in the settings: delete the SMS forwarding phone number), if this function is not absolutely necessary.

Message to the customer service



  • GPRS easyAID v3 Manual EN 26-01-2018
    2018.01.26 1.67 MB Download
  • GPRS easyAID v3 Quick Guide EN 26-01-2018
    2018.01.26 315.33 KB Download
  • GPRS easyAID Programming software v1.40 (without DotNET) (Signed)
    2020.06.18 1.58 MB Download
  • GPRS easyAID CE (EN)
    2011.12.04 628.98 KB Download
  • Release notes (EN)
    2017.04.21 1.61 KB Download
  • easyAID Monitoring firmware v3.0.129
    2020.09.29 589.34 KB Download
  • BootloaderX22 firmware upgrade instructions (EN)
    2012.08.17 1.86 KB Download
  • BootloaderX22 EN firmware upgrade utility
    2012.08.17 1.59 MB Download
no uploaded file