• en
Product catalogue Archive products FAQ Comparison
\ \

Adapter2 PRO - 4G.IN4.R1

comparison of products printable version
Product Models:
  • Product ID
    5999565331054
  • Package size
    170x120x35 mm
  • Package weight
    0.30 kg

Mobile application is available for this product for the following platforms:

The adapter enables installing an alarm system where no landline is available, but reporting to a monitoring station is required. A general emergency signaling device for elderly people and people in need of nursing, activated by simply picking up the receiver of the connected landline phone device.

Main Features:

  • 2G/3G/4G communication
  • Phone line emulator
  • Programmable through USB and IP
  • TEX-MVP, TELLMon, SIA IP protocol support
  • 4 configurable NO/NC inputs
  • 1 NO relay output, controllable by events
  • Reporting to up to 4 monitoring stations at the same time
  • 4 user phone numbers for sending SMS notifications
  • Notification through SMS about events (even by partition or zone)
  • E-mail sending
  • Push notification
  • IP camera support
  • Firmware update through USB and IP
  • Configurable Contact ID codes for each input and service event
  • Detailed event log
  • Transparent serial port support
  • Multiplatform mobile application (iOS,Android)

Application area:

  • The adapter enables installing alarm system where no landline is available but reporting to a monitoring station is required.
  • A general emergency signaling device for elderly people, and for those who need medical attendance by using the connectable landline phone device.

Technical specification

  • Transmission channel
    4G / 3G / 2G / GSM
  • Frequency band
    900/2100 MHz @UMTS, 900/1800 @GSM/GPRS
  • Operating temperature
    -20 ºC - +70 ºC
  • Supply voltage
    12-24 VDC
  • Current consumption (maximum)
    500 mA @ 12 VDC
  • Current consumption (nominal)
    120 mA @ 12 VDC
  • Casing
    Plastic
  • Terminal connector design
    Connectable
  • Dimensions
    84x72x32 mm
  • Weight
    200 g

Inputs

  • Contact inputs
    4
  • Configurable inputs (NO/NC)
    Yes
  • Adjustable input sensitivity
    Yes

Outputs

  • Relay outputs
    1
  • Output activation on GSM fault
    Yes

Notifications

  • GSM voice call
    Yes
  • SMS sending
    Yes
  • E-mail sending
    Yes
  • Push Notification
    Yes
  • IP-based reporting to CMS
    Yes
  • DTMF-based reporting to CMS
    Yes

Supported protocols

  • SIA IP DC-09 protocol
    Yes
  • SIA DC-05 (DTMF) protocol
    Yes
  • TELLMon protocol
    Yes
  • TEX protocol
    Yes

Programming

  • Programming method
    USB / IP
  • Programming software
    Yes

Users

  • User phone numbers for forwarding incoming SMS messages
    1
  • User phone numbers for reporting
    4

Remote monitoring

  • Monitoring station IP addresses
    4
  • Individual reporting to monitoring station
    Yes

Other functions

  • Configurable internal Contact ID event codes
    Yes
  • Automatic dialing (emergency call)
    Yes
  • Contact ID event code filtering
    Yes
  • Event logs / number of stored events
    Igen / 1000
  • Mobile application
    Yes
  • Individual SMS sending to user phone numbers with predefinable message
    Yes
  • Generates SMS from Contact ID event codes and sends to user phone numbers
    Yes
  • Phone line emulation
    Yes
  • NTP server support
    Yes
  • Transparent serial port support
    Yes
  • IP camera support
    Yes
  • Adaptation of alarm control panels to mobile network
    Yes

Message to the customer service

?

Downloads

Version:
  • Adapter2 v6.0.0 EN Manual
    2019.06.05 5.74 MB Download
  • Release notes - Programming Software
    2018.12.03 2.19 KB Download
  • Adapter2 Programming software v6.0.3 (4018)
    2019.08.30 26.06 MB Download
  • Release notes - Firmware
    2018.12.03 1.84 KB Download
  • Adapter2 PRO Firmware v6.0.4 (7715, EXE - USB)
    2019.10.31 961.34 KB Download
  • Adapter2 PRO Firmware v6.0.4 (7715, TF3 - USB/IP)
    2019.10.31 984.10 KB Download
no uploaded file